Page 159 - Tailoring Electrospinning Techniques for Regenerative Medicine - Marc Simonet

25 M. Stekelenburg, M. C. M. Rutten, L. H. E. H. Snoeckx, et al.,
Dynamic Straining Combined with Fibrin Gel Cell Seeding Improves Strength of Tissue-Engineered Small-Diameter Vascular Gra s, Tissue Eng. Part A, 2009, 15, 1081–1089.
26 P. Gupta and G. L. Wilkes, Some investigations on the fiber formation by utilizing a side-by-side bicomponent electrospinning approach, Polymer, 2003, 44, 6353–6359.
27 T. Lin, H. Wang and X. Wang, Adv. Mater., 2005, 17, 2699–2703.
28 W. Liu, J. Lipner, C. H. Moran, et al., Generation of electrospun nanofibers with controllable degrees of crimping through a simple, plasticizer-based treatment., Adv. Mater., 2015, 27, 2583– 8.
29 D. C. Surrao, J. W. S. Hayami, S. D. Waldman, et al., Self- crimping, biodegradable, electrospun polymer microfibers., Biomacromolecules, 2010, 11, 3624–9.
30 F. Chen, J. W. S. Hayami and B. G. Amsden, Electrospun Poly(l- lactide-co-acryloyl carbonate) Fiber Sca olds With a Mechanically Stable Crimp Structure For Ligament Tissue Engineering, Biomacromolecules, 2014, 15, 1593–1601.
31 S. M. Oliveira, R. L. Reis and J. F. Mano, Towards the design of 3D multiscale instructive tissue engineering constructs: Current approaches and trends, Biotechnol. Adv., 2015, 33, 842–855.
32 M. Yeo and G. Kim, Cell-printed hierarchical sca olds consisting of micro-sized polycaprolactone (PCL) and electrospun PCL nanofibers/cell-laden alginate struts for tissue regeneration, J. Mater. Chem. B, 2014, 2, 314–324.
33 S. M. Giannitelli, P. Mozetic, M. Trombetta, et al., Combined additive manufacturing approaches in tissue engineering, Acta Biomater., 2015, 24, 1–11.
34 G. Criscenti, A. Longoni, A. Di Luca, et al., Triphasic sca olds for the regeneration of the bone–ligament interface, Biofabrication, 2016, 8, 15009.
35 G. Luo, K. S. Teh, Y. Liu, et al., Direct-Write, Self-Aligned Electrospinning on Paper for Controllable Fabrication of Three- Dimensional Structures, ACS Appl. Mater. Interfaces, 2015, 7, 27765–27770.
36 T. D. Brown, P. D. Dalton and D. W. Hutmacher, Melt electrospinning today: An opportune time for an emerging polymer process, Prog. Polym. Sci., 2016, 56, 116–166.
GENERAL DISCUSSION
7 157