Page 133 - Magnesium-based supports for stem cell therapy of vascular disease - Mónica Echeverry Rendón

GENERAL DISCUSSION AND FUTURE PERSPECTIVES
Electrochim. Acta. 138 (2014) 124–131.
[16] H. Dong, Surface engineering of light alloys: aluminium, magnesium and titanium alloys, Elsevier, 2010.
[17] S.P. Albu, A. Ghicov, J.M. Macak, P. Schmuki, 250 $μ$m long anodic TiO2 nanotubes with hexagonal self-ordering, Phys.
Status Solidi (RRL)-Rapid Res. Lett. 1 (2007).
[18] H. Masuda, H. Yamada, M. Satoh, H. Asoh, M. Nakao, T. Tamamura, Highly ordered nanochannel-array architecture in anodic
alumina, Appl. Phys. Lett. 71 (1997) 2770–2772.
[19] S. Berger, J. Faltenbacher, S. Bauer, P. Schmuki, Enhanced self-ordering of anodic ZrO2 nanotubes in inorganic and organic
electrolytes using two-step anodization, Phys. Status Solidi (RRL)-Rapid Res. Lett. 2 (2008) 102–104.
[20] T.L. Nguyen, A. Blanquet, M.P. Staiger, G.J. Dias, T.B.F. Woodfield, On the role of surface roughness in the corrosion of pure
magnesium in vitro, J. Biomed. Mater. Res. Part B Appl. Biomater. 100 (2012) 1310–1318.
[21] L. Ponsonnet, V. Comte, A. Othmane, C. Lagneau, M. Charbonnier, M. Lissac, N. Jaffrezic, Effect of surface topography and
chemistry on adhesion, orientation and growth of fibroblasts on nickel–titanium substrates, Mater. Sci. Eng. C. 21 (2002) 157–
165. doi:10.1016/S0928-4931(02)00097-8.
[22] D.E. Bartak, B.E. Lemieux, E.R. Woolsey, Two-step electrochemical process for coating magnesium alloys, (1993).
[23] R.F. Zhang, Film formation in the second step of micro-arc oxidation on magnesium alloys, Corros. Sci. 52 (2010) 1285–1290.
[24] R.F. Zhang, D.Y. Shan, E.H. Han, The effect of substrates on properties of anodic coatings formed on Mg and Mg alloys, in: Key
Eng. Mater., 2008: pp. 248–251.
[25] Y. Xin, K. Huo, H. Tao, G. Tang, P.K. Chu, Influence of aggressive ions on the degradation behavior of biomedical magnesium
alloy in physiological environment, Acta Biomater. 4 (2008).
[26] J.P. Allain, M. Echeverry-rendón, J.J. Pavón, S.L. Arias, Nanostructured Biointerfaces, in: Nanopatterning Nanoscale Devices
Biol. Appl., CRC Press, 2014: pp. 41–67.
[27] P. Lu, H. Fan, Y. Liu, L. Cao, X. Wu, X. Xu, Controllable biodegradability, drug release behavior and hemocompatibility of PTX-
eluting magnesium stents., Colloids Surf. B. Biointerfaces. 83 (2011) 23–8. doi:10.1016/j.colsurfb.2010.10.038.
[28] Z. Zhen, X. Liu, T. Huang, T. Xi, Y. Zheng, Hemolysis and cytotoxicity mechanisms of biodegradable magnesium and its alloys.,
Mater. Sci. Eng. C. Mater. Biol. Appl. 46 (2015) 202–6. doi:10.1016/j.msec.2014.08.038.
[29] T. Ito, M. Kato, K. Toi, T. Shirakawa, I. Ikemoto, T. Tokuda, Oxygen species adsorbed on ultraviolet-irradiated magnesium
oxide, J. Chem. Soc. Faraday Trans. 1 Phys. Chem. Condens. Phases. 81 (1985) 2835–2844.
[30] S. Lerouge, M.R. Wertheimer, Y. L’H, Plasma sterilization: a review of parameters, mechanisms, and limitations, Plasmas 8 Polym. 6 (2001) 175–188.
[31] S. Hiromoto, T. Shishido, A. Yamamoto, N. Maruyama, H. Somekawa, T. Mukai, Precipitation control of calcium phosphate on
pure magnesium by anodization, Corros. Sci. 50 (2008) 2906–2913. doi:10.1016/j.corsci.2008.08.013.
[32] J.M. Topf, P.T. Murray, Hypomagnesemia and hypermagnesemia, Rev. Endocr. Metab. Disord. 4 (2003) 195–206.
[33] J. Gonzalez, R.Q. Hou, E.P.S. Nidadavolu, R. Willumeit-Römer, F. Feyerabend, Magnesium degradation under physiological conditions--Best practice, Bioact. Mater. 3 (2018) 174–185.
[34] A. Yamamoto, S. Hiromoto, Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in
vitro, Mater. Sci. Eng. C. 29 (2009) 1559–1568.
[35] M. Kieke, F. Feyerabend, J. Lemaitre, P. Behrens, R. Willumeit-Römer, Degradation rates and products of pure magnesium
exposed to different aqueous media under physiological conditions, BioNanoMaterials. 17 (2016) 131–143.
[36] D. Tie, F. Feyerabend, N. Hort, R. Willumeit, D. Hoeche, XPS studies of magnesium surfaces after exposure to Dulbecco’s
modified eagle medium, Hank’s buffered salt solution, and simulated body fluid, Adv. Eng. Mater. 12 (2010).
[37] J.A. Grogan, D. Gastaldi, M. Castelletti, F. Migliavacca, G. Dubini, P.E. McHugh, A novel flow chamber for biodegradable alloy
assessment in physiologically realistic environments, Rev. Sci. Instrum. 84 (2013) 94301.
[38] G.G. Perrault, The potential-pH diagram of the magnesium-water system, J. Electroanal. Chem. Interfacial Electrochem. 51
(1974) 107–119.
[39] J. Fischer, D. Pröfrock, N. Hort, R. Willumeit, F. Feyerabend, Improved cytotoxicity testing of magnesium materials, Mater.
Sci. Eng. B. 176 (2011) 830–834.
131