Page 82 - Development of Functional Scaffolds for Bone Tissue Engineering Using 3D-Bioprinting of Cells and Biomaterials - Yasaman Zamani

29. Saatchi A, Seddiqi H, Amoabediny G, Helder MN, Zandieh-Doulabi B, Klein-Nulend J. Computational Fluid Dynamics in 3D-Printed Scaffolds with Different Strand-Orientation in Perfusion Bioreactors. Iran J Chem Chem Eng 2019.
30. Koolstra JH, van Eijden TMGJ. Prediction of volumetric strain in the human temporomandibular joint cartilage during jaw movement. J Anat 2006;209:369-380.
31. Fernandez-Yague MA, Abbah SA, MacNamara L, Zeugolis DI, Pandit A, Biggs MJ. Biomimetic approaches in bone tissue engineering: Integrating biological and physicomechanical strstegies. Adv Drug Deliv Rev 2015;84:1-29.
32. Langenbach GE, Zhang F, Herring SW, van Eijden TMGJ, Hannam AG. Dynamic mechanics in the pig mandibular symphysis. J Anat 2006;209:69-78.
33. Chin Ang K, Fai Leong K, Kai Chua C, Chandrasekaran M. Investigation of the mechanical properties and porosity relationships in fused deposition modeling-fabricated porous structures. Rapid Prototyp J 2006;12:100-105.
34. Bartnikowski M, Klein TJ, Melchels FP, Woodruff MA. Effect of scaffold architecture on mechanical characteristics and osteoblast response to static and perfusion bioreactor cultures. Biotechnol Bioeng 2014;111:1440-1451.
35. Zhao H, Li L, Ding S, Liu C, Ai J. Effect of porous structure and pore size on mechanical strength of 3D-printed comby scaffolds. Mater Lett 2018;223:21-24.
36. Karande TS, Ong JL, Agrawal CM. Diffusion in musculoskeletal tissue engineering scaffolds: design issues related to porosity, permeability, architecture, and nutrient mixing. Ann Biomed Eng 2004;32:1728-1743.
37. Karageorgiou V, Kaplan D. Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 2005;26:5474-5491.
38. Liu Y, Lim J, Teoh SH. Development of clinically relevant scaffolds for vascularized bone tissue engineering. Biotechnol Adv 2013;31:688-705.
39. Trachtenberg JE, Mountziaris PM, Miller JS, Wettergreen M, Kasper FK, Mikos AG. Open-source 3D printing of biodegradable polymer scaffolds for tissue engineering. J Biomed Mater Res A 2014;102:4326-4335.
40. Ran Q, Yang W, Hu Y, Shen X, Yu Y, Xiang Y, Cai K. Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes. J Mech Behav Biomed Mater 2018;84:1-11.
41. Visscher DO, Gleadall A, Buskermolen JK, Burla F, Segal J, Koenderink GH, Helder MN, van Zuijlen PPM. Design and fabrication of a hybrid alginate/poly(ɛ-caprolactone) mold for auricular cartilage reconstruction. J Biomed Mater Res B Appl Biomater 2018;107:1711-1721.
42. Zhang Y, Liu Y, Chen H, Jiang Z, Hu Q. Preparation and evaluation of Physical/chemical gradient bone scaffold by 3D bio-printing technology. Adv Transdisciplinary Eng 2014;1:359-368.
80