Page 24 - Craniomaxillofacial Implant Surgery - Jeroen P.J. Dings

22
Chapter 1
28. Shrestha, B., et al., Prosthodontic rehabilitation of congenital auricular defect: a clinical report. Cleft Palate
Craniofac J 2015; 52: 229-33
29. Cotert, H.S. and M. Yilmaz, Bone and Skin-Supported Stereolithographic Surgical Guides for Cranio-Facial
Implant Placement. J Maxillofac Oral Surg 2016; 15: 76-81
30. Choi, K.J., et al., Image-Guided Placement of Osseointegrated Implants for Challenging Auricular, Orbital,
and Rhinectomy Defects. Ann Otol Rhinol Laryngol 2016; 125: 801-7
31. Huang, Y.H., et al., Virtual surgical planning and 3D printing in prosthetic orbital reconstruction with
percutaneous implants: a technical case report. Int Med Case Rep J 2016; 9: 341-345
32. Mischkowski, R.A., et al., Geometric accuracy of a newly developed cone-beam device for maxillofacial
imaging. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2007; 104: 551-9
33. Gerlach, N.L., et al., Accuracy of bone surface size and cortical layer thickness measurements using cone
beam computerized tomography. Clin Oral Implants Res 2013; 24: 793-7
34. Poeschl, P.W., et al., Comparison of cone-beam and conventional multislice computed tomography for
image-guided dental implant planning. Clin Oral Investig 2013; 17: 317-24
35. Dillenseger, J.P., et al., MSCT versus CBCT: evaluation of high-resolution acquisition modes for dento-
maxillary and skull-base imaging. Eur Radiol 2015; 25: 505-15
36. Chrcanovic, B.R., D.R. Oliveira, and A.L. Custodio, Accuracy evaluation of computed tomography-derived stereolithographic surgical guides in zygomatic implant placement in human cadavers. J Oral Implantol 2010; 36: 345-55
37. D’Haese, J., et al., Accuracy and complications using computer-designed stereolithographic surgical guides for oral rehabilitation by means of dental implants: a review of the literature. Clin Implant Dent Relat Res 2012; 14: 321-35
38. Turbush, S.K. and I. Turkyilmaz, Accuracy of three different types of stereolithographic surgical guide in implant placement: an in vitro study. J Prosthet Dent 2012; 108: 181-8
39. Goh, B.T. and K.H. Teoh, Orbital implant placement using a computer-aided design and manufacturing (CAD/CAM) stereolithographic surgical template protocol. Int J Oral Maxillofac Surg 2015; 44: 642-8
40. Ciocca, L., et al., Computer-aided design and manufacturing construction of a surgical template for craniofacial implant positioning to support a definitive nasal prosthesis. Clin Oral Implants Res 2011; 22: 850-6
41. Van der Meer, W.J., et al., Digitally designed surgical guides for placing extraoral implants in the mastoid area. Int J Oral Maxillofac Implants 2012; 27: 703-7
42. Raico Gallardo, Y.N., et al., Accuracy comparison of guided surgery for dental implants according to the tissue of support: a systematic review and meta-analysis. Clin Oral Implants Res 2017; 28: 602-612
43. Verhamme, L.M., et al., An Accuracy Study of Computer-Planned Implant Placement in the Augmented Maxilla Using Mucosa-Supported Surgical Templates. Clin Implant Dent Relat Res 2015; 17: 1154-63
44. Vercruyssen, M., et al., Guided surgery: accuracy and efficacy. Periodontol 2000 2014; 66: 228-46
45. Van de Wiele, G., et al., The accuracy of guided surgery via mucosa-supported stereolithographic surgical
templates in the hands of surgeons with little experience. Clin Oral Implants Res 2015; 26: 1489-94
46. Verhamme, L.M., et al., An accuracy study of computer-planned implant placement in the augmented
maxilla using osteosynthesis screws. Int J Oral Maxillofac Surg 2017; 46: 511-517
47. D’Haese, J., et al., Current state of the art of computer-guided implant surgery. Periodontol 2000 2017; 73: 121-
133
48. Neugebauer, J., et al., Computer-aided manufacturing technologies for guided implant placement. Expert
Rev Med Devices 2010; 7: 113-29
49. Dandekeri, S.S., M.K. Sowmya, and S. Bhandary, Stereolithographic surgical template: a review. J Clin Diagn
Res 2013; 7: 2093-5
50. Pettersson, A., et al., Accuracy of CAD/CAM-guided surgical template implant surgery on human cadavers:
Part I. J Prosthet Dent 2010; 103: 334-42
51. Widmann, G., et al., Cone Beam Computed Tomography vs Multislice Computed Tomography in Computer- Aided Design/Computer-Assisted Manufacture Guided Implant Surgery Based on Three-Dimensional Optical Scanning and Stereolithographic Guides: Does Image Modality Matter? Int J Oral Maxillofac Implants 2016; 31: 527-33
52. Van Assche, N., et al., Accuracy of computer-aided implant placement. Clin Oral Implants Res 2012; 23: 112-23